Hi IPT Team
If I place a outbound call. I cannot receive the busy tone from ISDN network. The H323 router disconnect the call after 20 seconds. I below attach the debug
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839E
Exclusive, Channel 30
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0081, '937496300'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '667631052'
Plan:Unknown, Type:Unknown
*Nov 28 08:36:53.581: ISDN Se0/0/0:15 Q931: RX <-CALL_PROC pd = 8 callref = 0x8D7E
Channel ID i = 0xA9839E
Exclusive, Channel 30
*Nov 28 08:36:54.997: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x8D7E
Cause i = 0x8091 -User busy
Progress Ind i = 0x8288 - In-band info or appropriate now available
*Nov 28 08:36:55.001: ISDN Se0/0/0:15 Q931: call_disc: PI received in disconnect
; Postpone sending RELEASE for callid 0x8CFF
thanks in advanced for your help
If I place a outbound call. I cannot receive the busy tone from ISDN network. The H323 router disconnect the call after 20 seconds. I below attach the debug
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839E
Exclusive, Channel 30
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0081, '937496300'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '667631052'
Plan:Unknown, Type:Unknown
*Nov 28 08:36:53.581: ISDN Se0/0/0:15 Q931: RX <-CALL_PROC pd = 8 callref = 0x8D7E
Channel ID i = 0xA9839E
Exclusive, Channel 30
*Nov 28 08:36:54.997: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x8D7E
Cause i = 0x8091 -User busy
Progress Ind i = 0x8288 - In-band info or appropriate now available
*Nov 28 08:36:55.001: ISDN Se0/0/0:15 Q931: call_disc: PI received in disconnect
; Postpone sending RELEASE for callid 0x8CFF
thanks in advanced for your help