Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Building Computer System-At stage Bios setup
- Thread starter Tvisitor
- Start date
- Status
The reference to 80 conductor cable means that you more than likely are using standard (40 connductor) IDE cables. If so, all of the connectors will be black.
While the newer (80 connductor) IDE cables have 3 different color connectors. (Blue, Gray, & Black) Blue (end) connects to the Disk Controller. Black (other end) is the Master Drive providing you adhere to (CS) cable select drive jumpering. And finally Gray (middle) this is the Slave Drive.
Enjoy
While the newer (80 connductor) IDE cables have 3 different color connectors. (Blue, Gray, & Black) Blue (end) connects to the Disk Controller. Black (other end) is the Master Drive providing you adhere to (CS) cable select drive jumpering. And finally Gray (middle) this is the Slave Drive.
Enjoy
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question