Building A Call Pilot Tree

[nyjp26]

I have a hot line 888-XXX-XXXX goes direct to a did within location (7788) if this line is not answered they need the phone to go to a menu with 2 option. option 1 press 1 to leave a voice mail option 2 press 2 to be routed to another 888-XXX-XXXX number.Can isimple build within voice mail? if so where can i locate info or get a step by step. Thanks

 

[bigindian65]

per your original post, this is done thru Application Builder that must be installed on a PC, it is on th CP install disk. From there you would build your application using a menu and specifying what pressing 1 xfers to, and what pressing 2 xfers to.

Mato' Was'aka

 

[nyjp26]

Ok i now have it up and running however 1 question where do i find all the information to login and change greeting

 

[nyjp26]

Got it Big Thanks My Friend