Build in Webserver in 46xx

[Sorpio]

Is there webserver in the 46xx phones, so that i can adminstrate them via a browser?

 

[tlpeter]

No you have to set up a webserver but it must be WAP !!!

The phones can only work with that


ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[kurthansen]

I think they is asking if he can open up a web browser on their computer and put in the IP address of the phone. You can't do that.

And there is a built in WPA browser on the phone as tlpeter said. I think only the larger display models have it though 4620 & 5620.

 

[Sorpio]

i´m trying to set up the 9620 with ipo. it works with an h323 endpoint lic. i would like to know if there is any knowledge in the field to telnet or to admin the phone via webbrowser. the 9620 looks quiet equal to the 4610 and is already recognized as an 9620 in the ipo-manager with SW 4.1.9. i would like to change the sysname of th 9620 to 4610, so that it works without the lic. i made a port scan port 80 is open, but i didn´t get a def webpage. so i asked for 46xx, because i think there is much more knowledge in this forum. i will disassembly the phone and i´ll look for a serial debug connection.

 

[nt7332]

I to would like to setup a 96xx phone on the IPO can you give me the steps you took to do this?

 

[Bas1234]

@ nt7332

I don't think the 96xx series will work on the IPO.
The 16xx will be supported in the new release 4.2.

Greetzzz...Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[puregold]

Neither do i.

ACE - Avaya Certified Expert
ACI - Avaya Certified Instructor