BUG5327 and BSD090's

[lenzhin]

Please see error log below. I have replaced the power supply in what I think is cab2 to try and get rid of the BSD090 error, but the error is still coming. We have 3 cabinets, is the numbering of the cabinets 0, 1, 2 - 0 being the cab with the SSC card in it? Does this look like a NTDK23AA daughter card or fiber receiver card in cab2 going bad?

Thanks,


BSD090 EXPANSION CABINET 2 - PWR BATT
%
%
% BSD EXPANSION CABINET 2 - PWR OK BATT OK
% TIM000 05:54 30/7/2012 CPU 0
%
% ERR5101
%
% BUG5327
% BUG5327 : FFFF0001 00000001 00000004 00000004 00000000 00000000
% BUG5327 + 106D4EA8 10D86F28 10D83F74 10D83974 10D838B8
% BUG5327 + 10D821B4 10D81DA4 10D81C6E 10F5A16E 10F59DAC
% BUG5327 + 10F59AA2 10F59984
%
% ERR5106
%
% TIM000 06:00 30/7/2012 CPU 0
%
% BSD090 EXPANSION CABINET 2 - PWR BATT
%
%
% BSD EXPANSION CABINET 2 - PWR OK BATT OK

 

[Triton101]

do you have an external battery hooked up to that power supply? (white ended plug i think) aside from the AC plug.

maybe it's the battery that is causing the problem?

or maybe the site had a powerdown, and somone forgot to flip the breaker back to ON in the battery box?

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius

 

[Firebird Scrambler]

I've found this report below.

Symptoms:
Sets disabling in expansion cabinet.

BSD090 Expansion Cabinet 1 - PWR BATT

BSD090 Expansion Cabinet 1 - PWR OK BATT OK

Replace the NTAK78AA 10 meter plastic fiber cable. Temporary workaround could be to unroll the cable
from the fiber receiver card spool so that the cable is somewhat straight.

I've personally had this problem and unrolling the fibre did work for me as a temporary fix until I had replaced the cable.

The other time I had frequent BSD090 errors, it needed the main SSC changing out. It's rare for the expansion cabinet fibre board to fail, but you could swap that out as I did with one from another cabinet to help pinpoint the fault.







All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[lenzhin]

Thanks for the replies,

What about the cabinet numbering?