Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BUG4046

Status
Not open for further replies.
mcbro

mcbro

Technical User
Jan 20, 2009
15
0
0
US
We are getting a ton of BUG4046. We have had the CO turn off caller name Display and still get them. The following HEX info is all I get and I am having trouble telling where they are coming from. Is anyone out there able to vonvert this to a DCH or Trunk TN?

BUG4046
BUG4046 : 00000003 00000004 00000000
BUG4046 + 00B437C2 013AC1C5 013AC096 013142A5 01304762
BUG4046 + 013043D0 013034C7 0130205A 012CFE7E 012CECF5
BUG4046 + 012CC474 012CAC8F 012CA57A 011B0032 011B9ED1
BUG4046 + 011B9E1D 011B7AB0 011AEAAF 00BC7F70 00BC4B1C
BUG4046 + 26011086 01B7E726 01B77CC2 01AA6395 0112006D

BUG4046
BUG4046 : 00000003 00000004 26324000
BUG4046 + 00B437C2 013AC1C5 013AC096 013142A5 01304762
BUG4046 + 013043D0 013034C7 0130205A 012CFE7E 012CECF5
BUG4046 + 012CC474 012CAC8F 012CA57A 011B0032 011B9ED1
BUG4046 + 011B9E1D 011B7AB0 011AEAAF 00BC7F70 00BC4B1C
BUG4046 + 26011086 01B7E726 01B77CC2 01AA6395 0112006D

BUG4046
BUG4046 : 00000003 00000004 00000000
BUG4046 + 00B437C2 013AC1C5 013AC096 013142A5 01304762
BUG4046 + 013043D0 013034C7 0130205A 012CFE7E 012CECF5
BUG4046 + 012CC474 012CAC8F 012CA57A 011B0032 011B9ED1
BUG4046 + 011B9E1D 011B7AB0 011AEAAF 00BC7F70 00BC4B1C
BUG4046 + 26011086 01B7E726 01B77CC2 01AA6395 0112006D
 
Sort by date Sort by votes
I've found 2 references to the BUG message below.

This BUG4046 is printed because this node received a FACILITY message on a dch, asking us to perform TAT. But at our node TAT is not configured as an RCAP, therefore we print the bug4046. remove tat from far end dch rcap.

NB: TAT requires an MSDL-based DCH for the feature to work. The NTAK79 PRI card on small systems will not support TAT.


Trunk Anti-Tromboning (TAT)
PRI5032
BUG4046
MSDL required for RCAP = TAT

Meridian 1 / CS1000 ISDN PRI TAT feature

The system only supports Trunk Anti-Tromboning on the Multi-purpose Serial Data Link (MSDL) card for D-channel handling.

Note: Small Systems and CS 1000S systems only support the Trunk Anti-Tromboning feature on the NTBK51BA D-Channel Daughterboard for D-channel handling with PRI. The NTAK79 2MB PRI card does not support TAT.
To support the Trunk Anti-Tromboning feature within a dedicated ISL/VNS configuration, an NTAK02 (minimum vintage BB) Serial Data Interface (SDI)/D-channel (DCH) circuit card must be used.

See the ISDN Primary Rate Features NTP for a full description of Trunk Route Optimisation and TAT



All the best

Firebird Scrambler
Meridian Programmer in the UK

If it's working, then leave it alone!.
 
Upvote 0 Downvote
We are not using TAT. There are some other threads that reference the bug4046 and I have not been able to resolve.
If you look it up on the Nortel site it say's it is caused by Name display from the PSTN. We had it turned off.
We have 2 pri's to the PSTN and 2 PRI's to an interactive Intellegence call center.
I am having trouble converting the HEX to get to the source DCH. I can't tell which one needs to be fixed. It may not be the PSTN.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

1norteltech
  • Locked
  • Question
D Channel Messages and BUG4046 1
Replies
2
Views
15
1norteltech
1norteltech
rhinohertz
  • Locked
  • Question
option 11. bug4046
Replies
0
Views
6
rhinohertz
rhinohertz
mrgauth
  • Locked
  • Question
Help with BUG4046 code. Thanks.
Replies
2
Views
17
mrgauth
mrgauth

Part and Inventory Search

Sponsor

Back
Top