Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BUG304

Status
Not open for further replies.
marc3lo

marc3lo

Technical User
Jul 11, 2005
85
0
0
MX
Hello, I have a CSE1000M PII system running SW 4.50W. The system is sending the next BUG and I don’t what is causing it.
BUG304 TNTRANS found invalid ULPTR, TN A403, pointer 0xf240
15/04/2008 12:18:36 BUG0304 TNTRANS found invalid ULPTR, TN A403, pointer 0xf240
There I no service failing in the system but the message appear every 3 or 4 minutes, Check my NTP but didn’t found info on this BUG. Does anybody have this problem before?

 
Sort by date Sort by votes
Action: If the error occurs repetitively for the same TN value consider disabling
or removing that TN from the software. The TN is in packed form, which can be
unpacked using the LD 32 command CONV. The error should be reported to the
operating company with report log traces.
Severity: Major. Critical to Monitor: Yes. SNMP trap: Yes
Click to expand...

is it always against the same tn?.

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Thanks John.
It was alwas the same TN I check it and it was a phantom.
I will start to fix the problem
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top