BUG253

[phnechic]

I have a PRI T1 that keeps dropping. Can anyone translate this error code for me? I haven't been able to find it anywhere:

BUG253
BUG253 : 410
BUG253 + 106C4A44 103250A0 102FC656 102FA3E0 105C8B0A
BUG253 + 105C7E30 105C2A4C 105C008C 10F0B32E 10F0AE5E
BUG253 + 10F0AD74 10F0A6B4 10F057C8 10EFFCC2

 

[KillianK]

**** and err BUG253 on you Nortel and see what is comes back with?

Cheers,

Killian,

NextiraOne Ireland

http://www.NextiraOne.ie

 

[phnechic]

Thanks. Not sure that the result gave me much more information, but I guess I'll check with my vendor. Here it is for anyone who is curious:

BUG0253
Utility procedure called with invalid required data. Parameters: global
number and optional debugging parameters.
Action: Report the problem text to the operating company.
Severity: Minor

 

[teekow]

Has anyone else had this bug and knows if it is something I should worry about. Usually the description points you in the right direction, but this one has me stumped. I get this bug once about every 5-10 minutes. I also always get it if I build a new NACD day or night table. The system is a brand new Option 11 with Succession 4.0 software. Any other suggestions?

 

[johnpoole]

make sure your interface type and rls match the far end. also do a lcnt in load 60 to check the error tables. another thing to check is messages in ld 96, or they on? if so turn them off, if their off turn them on. a mismatch can cause bug errors, another mismatch that can cause problems is in the route vsel = vod or vce, if they don't match the far end you have strange problems, change that entry and see if the trouble goes away.. the bug is telling you that their is at least one mismatch in the route/dch.. finding it is up to you, the operating company built the far end per your request (we hope) so they except you to match them on your end.. also check for patches for your rls and system type...

john poole
bellsouth business
columbia,sc

 

[TheWorkingMan]

If your are running 4.0t Install Patch MPLR19308

TWM