BUG0841 1

[wbaith]

I am adding DENY entries to an SPN and I keep getting BUG0841 codes when I hit return after entering the DENY entry.

Here is the description of BUG0841:

BUG0841
Block size parameter is not correct. Procedure File MEMXXX.
Output: PAGE#, BLKSIZE.

Severity: Minor

Here is the text capture from the PBX. Should I be concerned about this?

>ld 90
ESN000

MEM AVAIL: (U/P): 2816400 USED U P: 299974 29353 TOT: 3145727
DISK RECS AVAIL: 489
REQ chg
CUST 0
FEAT net
TRAN ac1
TYPE spn

SPN 911
FLEN 4
ITOH no
RLI 20
SDRR deny
DENY 0

TIM000 11:45 2/8/2004 CPU 0
DENY
BUG841
BUG841 : 0 00001991 0 00001995 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88
1
DENY
BUG841
BUG841 : 0 00001995 0 00001999 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88
2
DENY
BUG841
BUG841 : 0 00001999 0 0000199D 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88

IOD318 00
3
DENY
BUG841
BUG841 : 0 0000199D 0 000019A1 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88
4
DENY
BUG841
BUG841 : 0 000019A1 0 000019A5 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88
5
DENY
BUG841
BUG841 : 0 000019A5 0 000019A9 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88
6
DENY
BUG841
BUG841 : 0 000019A9 0 000019AD 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88
7

BUG841
BUG841 : 0 000019AD 0 000019B1 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88
DENY 8
DENY
BUG841
BUG841 : 0 000019B1 0 000019B5 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88

IOD318 00
9
DENY
BUG841
BUG841 : 0 000019B5 0 000019B9 00000000
BUG841 + 106C4A44 1083FC5C 1144168E 11441374 114412A0
BUG841 + 114409AA 1143E65E 1143E600 1143DF9C 1143D574
BUG841 + 1143D0EC 1143CF2E 1143CBE8 1143CA9C 1143C94C
BUG841 + 1143C8E8 109C91DA 109C7FFA 109C32CC 109C3180
BUG841 + 109B8EAE 109B154E 109B0BA8 10F000E0 10EFFEA6
BUG841 + 10EFFD88

SDRR
ITEI

SPN


MEM AVAIL: (U/P): 2816356 USED U P: 299974 29397 TOT: 3145727
DISK RECS AVAIL: 489
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE spn

SPN 911

SPN 911
FLEN 4
ITOH NO
RLI 20
DENY 0

DENY 1

DENY 2

DENY 3

DENY 4

DENY 5

DENY 6

DENY 7

DENY 8

DENY 9

SDRR DENY CODES = 10
ITEI NONE

 

[ArchibaldJCox]

There is a patch from Nortel for that error to be resolved. Contact your vendor and have them install patch P18024.

Arch

------

http://www.infoplusonline.com

Site Surveys
SourceBooks
Security Audits
Traffic Studies
Remote PBX Backups

 

[MERIDIAN11C]

is Op 11 ? and Rls ?

 

[wbaith]

Thanks, ArchibaldJCox! I'll contact our vendor.

MERIDIAN11C, this is a brand new Opt 11 with Succession 3.0. I don't even have any sets built yet. I thought maybe I forgot to build something in LD 15 or 17??? If it's just a problem with needing a patch, no big deal.

Here's a question, would a brand new PBX need any PEPs or patches installed right out of the box?

 

[ArchibaldJCox]

Yes. Recently I worked in conjunction with Nortel on a project where all the PBXs were out-of-box 11C with Succession 3.0 software. There were 4-5 different patches that they installed as standard first steps. (P18024 being the one that was missing from two sites, hence I had the same BUG0841 problem.) I'll see if I can get the list of other patches for you.

Arch

------

http://www.infoplusonline.com

Site Surveys
SourceBooks
Security Audits
Traffic Studies
Remote PBX Backups

 

[wbaith]

ArchibaldJCox, thank you so very much. You people don't know how much of a help you've been to me. This is my 4th OPT 11 install and I think there has been around 2 years between each install. Every time I install a PBX it feels like the first time.

I work on so many other systems (analog microwave, 2-way radio, cisco routers, fiber MUX, etc.) that it is hard to be an expert on any of them.

Anyway, if you can give me the other patches, I will call our vendor and have them installed.

Once again, a HUGE thank you!

Bill

 

[wbaith]

ArchibaldJCox,

Did you ever find those other patches?

 

[johnpoole]

why do you need deny codes after 911? did i miss something i need to add to my switch?

john poole
bellsouth business
columbia,sc

 

[ArchibaldJCox]

Just got the patch list. Here you go:

  p10658_1.ssc
  p16540_1.ssc
  p17601a1.ssc
  p17601b1.ssc
  p17601c1.ssc
  p17643_1.ssc
  p17897_1.ssc
p13028_1.ssc
  p17571_1.ssc
  p17845_1.ssc
  p13291_1.ssc
  p17639_1.ssc
  p17890_1.ssc
  p18024_1.ssc

That's what I got right from a guy at Nortel.

Arch

 

[wbaith]

johnpoole, this is why I have deny codes after 911:

To stop misdials to 911/9911 using SPN, FLEN and SDRR. In the following example, callers dialing 9911 will route to the 911 center. However, if they dial 9911 + any additional digits) the call will be blocked. There is a slight delay before ringing 911. Note - if SPN is "11", FLEN must be 3

>ld 90
ESN000

FEAT net
TRAN ac1
TYPE spn

SPN 911
FLEN 4
ITOH NO
RLI (Yours)
DENY 0
DENY 1
DENY 2
DENY 3
DENY 4
DENY 5
DENY 6
DENY 7
DENY 8
DENY 9
SDRR DENY CODES = 10
ITEI NONE

 

[wbaith]

Arch,

Thanks for your help. I provided the list you gave me to our vendor.

This week, YOU 'Da man!!!

 

[Avaya911PLM]

Hang on folks. That is NOT the current patch list.

The proper patch load for ANY system that is 25.40 or higher will be a current load of what Nortel calls Dependency Pak patches. These are grouped into catagories for specific applications installed, and the general ist is about 30 to 50 patches depending on what the site has installed (IP, Call Pilot, Symposium, etc.)

Your vendor should run an MIRCC patch sudit to determine the proper patch load for a particular switch.

--
Fletch

 

[ArchibaldJCox]

Sorry if anyone misinterpreted my message to say that the list was some sort of must-have patches from Nortel. These were the specific patches that were required on all the sites with the project I was working on. In this case, Option 11C running Succession 3.0 software. I have no description of the patches, just a list of them.

Arch