Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

bug0330

Status
Not open for further replies.

coniglio

Technical User
Jun 17, 2003
1,886
US
i am being bombarded with BUG0330 messages in one of my PBXs. The code indicates "traffic start times mismatch". I have had my vendor sysload the switch twice. Still getting them. Does anyone know what I need to do to correct this? also, as an aside, what is the difference between a sysload, reload and initialization of the PBX? Do they all mean the same thing? thanks to all.
 
I do not know. How difficult is it for me to tell? when I go to LD 2 I get TFC000 followed by a dot (ready for command). The NTP says TFC000 means traffic program is running.
 
LD 2 "print" commands

TOPC C Print the current customer report types
TOPN C Print the current network report types
TOPS Print the current system report types
TSHC C Print current customer report schedule
TSHS Print current system report schedule

C = Customer Number (usually 0)

-Archie
 
agree with Archie but if you receive any info
you should null

to change the system reports schedule

to print th e current report types
TOPS you shold see something

to clear one or more reports type
COPS and the numbers that you see with TOPS
 
thank you for your replies, but since the only thing I know how to do in LD 2 is reset the time I'm going to refer this to my maintenance vendor. It sounds a bit involved. thank you again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top