BUG030

[4d4m]

I have a problem with messages BUG030.
My Meridian options 71, Software Release 21.19 Phase 3 is connect to other switch PRA (EURO ETSI).
If my analog subscriber (DTMF) call to remote subscriber (TSC or DSC) Meridian send message BUG030.
If my another subscriber (2616, ISDN) call to remote subscriber BUG030 is not send.
If analog subscriber call (PULSE) to remote subscriber BUG030 is not send too.

4 0 0 2 - XTD
15 30 - TIE PRA (EURO ETSI)

Its my monitoring DCH:

DCH 2 UIPE_OMSG CC_SETUP_REQ REF 00001E CH 15 30 TOD 11:21:32
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:422054002 NUM PLAN: E164
CALLED #:5914 NUM PLAN: E164

DCH 2 UIPE_IMSG CC_ALERT_IND REF 00001E CH 15 30 TOD 11:21:32

BUG030 100762 17A8D5 3F3612 3F23EC 3F20C8 3EEF4C 3EEDF8
BUG30 + 3EEBC1 3EDFA6 3EDFA0 3EDF3C 37BC45 37BAE0 37B80C
BUG030 + 379DA5 379D2C 379D24 0BB098 0BB058 0B9848
BUG030 : 4 0 0 2 15 30 0
DCH 2 UIPE_IMSG CC_SETUP_CONF REF 00001E CH 15 30 TOD 11:21:34

DCH 2 UIPE_OMSG CC_DISC_REQ REF 00001E CH 15 30 TOD 11:21:38
CAUSE: #16 - NORMAL CALL CLEARING

DCH 2 UIPE_IMSG CC_RELEASE_IND REF 00001E CH 15 30 TOD 11:21:38
CAUSE: #16 - NORMAL CALL CLEARING

What is wrong ?

Best regards

Adam

 

[nomek]

yes yes 4d4m i have the same problem with my old meridian 21.19 ph3.
is anybody in the world who knows what is it????