homerunkevin
IS-IT--Management
Good afternoon. I need help to extend Netgear wireless coverage by trying to setup a Buffalo G125 as a repeater.. What I had try to so far is the following:
? Setup the buffalo using same channel, same ssid, and same WEP encryption on buffalo
? Turn off router on internet /lan and physically switch router mode to off
? On repeater tab, enable wds…not sure what the enable dedicated wds is all about
? I can pick up the signal but not get any internet connection? IF any one has any good idea. Please let me know. Any help greatly appreciated.
Best regards
Kevin Z
Techncial Support specailist
? Setup the buffalo using same channel, same ssid, and same WEP encryption on buffalo
? Turn off router on internet /lan and physically switch router mode to off
? On repeater tab, enable wds…not sure what the enable dedicated wds is all about
? I can pick up the signal but not get any internet connection? IF any one has any good idea. Please let me know. Any help greatly appreciated.
Best regards
Kevin Z
Techncial Support specailist
