Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BSR VPN Router

Status
Not open for further replies.

telcodog

Technical User
Jan 1, 2007
1,443
CA
I have a bcm50 (all patched up) with ip sets at 4 remote locations, all equipped with BSR222s. I have all the tunnels up and the ip sets working fine but I'm unlear as to how to set them up so the ip sets can actually talk to one another. I'm familiar with packet flow between ip sets, just unclear on how to set up the BSRs. Setup is like this:

Main site subnet 192.168.1.X
Site B subnet 192.168.2.X
Site C subnet 192.168.3.X
Site D subnet 192.168.4.X
Site E subnet 192.168.5.X

All tunnels are established and the ip sets can talk to anyone at the main site or external calls but no voice between the ip sets. The manual is really unclear on how to set things up for this. A screen shot of how to do it would be very helpful.
 
sounds to me like your sites B C D E do not have ip routes to each other

from site B try pinging a ip set at set C if you get no reply you need to configure your ip routes accordingly..

BTW i don`t know how to do this on the BSR222

If its not broke tweak it..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top