BSD 0090

[port27]

what's up guys,i got this type of alarm BSD0090 for several days and the power suply was replaced twice i checked all wires like the fiber optic that goes to second cabinet by the way this is a opt 11c w/2 cabinets.Please any suggestions,thanks

 

[johnpoole]

ld 135
cmin
cmaj

then check your ovly to make sure 45 is in the drol

john poole
bellsouth business
columbia,sc

 

[port27]

thanks johnpool,somebody toll me to go LD 32 and then Ld 43 to do mindnight routine 2 times but not sure is this will fixed the problem.

 

[telebub]

Could be your fiber receiver card in one of the expansion cabinets. I had this happen a few months back. Getting BSD090 errors on the expansion cabinet. Replaced the power supply 1st and it didn't fix it. Noticed the TTY port we had built on that fiber expansion card was throwing out a lot of garbage. Replaced that card and our TTY port was clean and the BSD090 errors stopped.

 

[bhassell2000]

I have had the same issue with a fiber card, I don't remember if I replaced the fiber or card. I think it was the fiber. The SSC was losing communication with the cabinet

Thanks,

Buddy