Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BS 370

Status
Not open for further replies.

new2md

Technical User
Mar 9, 2005
34
TZ
Gidday all
Please give me an idea to huck up BS 370 with (TSWsp2).
My 340 sitting: 001-0-40 ELU31 ROF1375412/1 R2C
R9A EXE
I tried all the possibility on BSM. It comes up but drops the speech first and then call after sometime.

Cheers !
 
Basically you only connect power feeding to the BS370, then it should lock to the strongest the system in the area.
 
Hi ! Etompau,
It does connect to strogest system and rest two options. But the problem is as soon as it is connected all DECTs in it's range are dropped, saying no signal. Also when signal comes up DECT can be connected to any line. Subsequently there is loss of speech and after some time line is dropped.Once I disconnect 370 all DECTs within it's range are disturbed for few minutes looking for available RPN. May be the whole recieved lot is defective.This is first time I am trying to huck 370 at this site, only 340s are operational.
 
If you lock the BS370 to the strongest system, then watch out for other dect system in the area. It might be that the BS370 will lock to a different system that your TSW-system.

Also verify that you can see the BS370 (Rp number) in the service menu of the portable and that you have a good insignal to the BS370 from the host base (BS340).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top