Brooktrout Foip Software and IP Office

[djuplift]

http://www.dialogic.com/interoperability/fax.htm

Has anyone attempted to connect one of these to an IPO?

I have customer looking to remove an old Adtran router that is currently routing the fax calls to the Brooktrout faxcore server.

I am looking to use either H.323 or SIP to route fax calls to this thing using this software/card

http://www.dialogic.com/interoperability/fax.htm

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+

 

[tlpeter]

Don't use H.323
When you need to use the ipo then use sip and T.38


When you pay peanuts, you get monkeys!

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[djuplift]

I figured as much what I am trying to figure out is if it will even work with that hardware/software. On the vendor site they list comm manager as supported but not IPO, I am hoping that someone has done it with an IPO.

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+

 

[tlpeter]

When it is using the SIP standards then it will work.


When you pay peanuts, you get monkeys!

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[Bas1234]

Sip is better, but H323 should also work;
This is from a ACM but it will point you in the right direction.

http://www.avaya.com/master-usa/en-us/resource/assets/applicationnotes/sr140-h323-acm.pdf

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________