Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations sizbut on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Broken Pin on DRAM no Error?
- Thread starter erickster
- Start date
MoshiachNow
IS-IT--Management
Hi,
Two possible reasons:
1.This pin in not in use - this happens.
2.Your appliaction have not yet run into the memory space that involves the usage of this pin (adress for example).
Diag does only a partial memory testing... "Long live king Moshiach !"
Two possible reasons:
1.This pin in not in use - this happens.
2.Your appliaction have not yet run into the memory space that involves the usage of this pin (adress for example).
Diag does only a partial memory testing... "Long live king Moshiach !"
Hi,
I think P630 has Service Processor.
You can connect to box using ACSII terminal or notebook and try manually to configure DIMM 4.
I have this problem time to time on all Power3 boxes and one time only memory DIMM was broken. In all other cases I configured it manually.
Regards Boris
I think P630 has Service Processor.
You can connect to box using ACSII terminal or notebook and try manually to configure DIMM 4.
I have this problem time to time on all Power3 boxes and one time only memory DIMM was broken. In all other cases I configured it manually.
Regards Boris
- Status
Similar threads
- Locked
- Question
- Locked
- Question