preferences
IS-IT--Management
hey guys,
Been a lurker on here for quite some time and never made the jump into the world, but gotta say feels good to be signed up!
So I've got an issue on hand here...
I have a core network running on a 10.0.101.1/24 subnet for all our LAN clients. I also have a demo lab holding the 10.0.102.1/24 and other subnets. I wanted to tie the two swithes together and have it so i can be on the .101.1/24 subnet and be able to talk to the .102.1/24 subnet or ANY subnet i create on the Extreme switch for that matter!
I have set up 2 VR interfaces on the Brocade, (1 for .101.1 sub and one for .102.1 sub)
Problem is i am still unable to ping from my extreme to the brocade and vice a versa.. here is a quick show Vlan. Mind you if i plug into the port on the brocade and put myself in the subnet i can ping the virtual interface on the brocade..
* Lab_Front_Extreme.38 # show vlan
---------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------
Default 102 10.0.102.2 /24 -----------T----------- ANY 24/45 VR-Default
imtlab 2 10.0.1.254 /24 ----------------------- ANY 0 /0 VR-Default
imtlab_cxfs 1000 10.10.10.1 /24 ----------------------- ANY 2 /4 VR-Default
Lab 4086 ------------------------------------------- ANY 0 /0 VR-Default
LabMGMT 4085 ------------------------------------------- ANY 0 /0 VR-Default
MediaGrid 4089 10.10.20.1 /24 ----------------------- ANY 12/19 VR-Default
MediaGrid01 4088 192.168.1.1 /24 ----------------------- ANY 2 /2 VR-Default
MediaGrid02 4087 192.168.2.1 /24 ----------------------- ANY 2 /2 VR-Default
Mgmt 4095 10.20.205.1 /24 ----------------------- ANY 1 /1 VR-Mgmt
netlogvlan 4094 --------------------D---------------------- ANY 0 /0 VR-Default
nlvlan 4091 ----------------------LN------------------- ANY 0 /0 VR-Default
test 101 10.0.101.1 /24 -f--------------------- ANY 0 /0 VR-Default
trunk_to_brocade 4082 ------------------------------------------- ANY 0 /0 VR-Default
---------------------------------------------------------------------------------------
Flags : (C) EAPS Control VLAN, (d) NetLogin Dynamically created VLAN,
(D) VLAN Admin Disabled, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (i) ISIS Enabled, (L) Loopback Enabled,
(l) MPLS Enabled, (m) IPmc Forwarding Enabled,
(M) Translation Member VLAN or Subscriber VLAN,
IP Multinetting Enabled,
(N) Network Login VLAN, (o) OSPF Enabled, (O) Flooding Disabled, (p) PIM Enabled,
(P) EAPS protected VLAN, (r) RIP Enabled, (R) Sub-VLAN IP Range Configured,
(s) Sub-VLAN, (S) Super-VLAN, (t) Translation VLAN or Network VLAN,
(T) Member of STP Domain, (V) VPLS Enabled, (v) VRRP Enabled
Total number of VLAN(s) : 13
So i was poking around here and did notice that maybe i need to set my default gateway to be the 10.0.101.1 network, but that would only be good for internet access, NOT the .102.1/24 subnet.
My next theory is the problem with the VR-Default Router. Will/is this creating a conflict with my brocade cause we are doing double routing??? My gut says yes... but never 100% sure!
I'll leave it here, cause i have been here for about 12 hours and quite frankly, I'm a little shot on the situation.
Ill report in tomorrow when i begin with another go..
Thanks for your time,
P
**this might help you all**
* Lab_Front_Extreme.34 # show configuration
#
# Module devmgr configuration.
#
configure snmp sysName "Lab_Front_Extreme"
configure timezone -480 autodst
configure slot 1 module G48T
configure sys-recovery-level slot 1 reset
configure slot 2 module G48T
configure sys-recovery-level slot 2 reset
configure slot 5 module 10G8Xc
configure sys-recovery-level slot 5 reset
#
# Module vlan configuration.
#
configure vlan default delete ports 1:24, 1:45, 1:48, 2:1-48, 5:1-8
configure vlan Default tag 102
create vlan "imtlab"
configure vlan imtlab tag 2
create vlan "imtlab_cxfs"
configure vlan imtlab_cxfs tag 1000
create vlan "Lab"
create vlan "LabMGMT"
create vlan "MediaGrid"
create vlan "MediaGrid01"
create vlan "MediaGrid02"
create vlan "netlogvlan"
create vlan "nlvlan"
create vlan "test"
configure vlan test tag 101
create vlan "trunk_to_brocade"
configure ports 5:1 auto off speed 10000 duplex full
configure ports 5:2 auto off speed 10000 duplex full
configure ports 5:3 auto off speed 10000 duplex full
configure ports 5:4 auto off speed 10000 duplex full
configure ports 5:5 auto off speed 10000 duplex full
configure ports 5:6 auto off speed 10000 duplex full
configure ports 5:7 auto off speed 10000 duplex full
configure ports 5:8 auto off speed 10000 duplex full
enable sharing 2:23 grouping 2:23-24, 2:48 algorithm address-based L2 lacp
enable sharing 5:6 grouping 5:6-7 algorithm address-based L2 lacp
enable sharing 1:24 grouping 1:24 algorithm address-based L2 lacp
configure vlan Default add ports 1:1-23, 1:25-44, 1:46-47 untagged
configure vlan imtlab_cxfs add ports 1:19-22 tagged
configure vlan MediaGrid add ports 2:1-15, 5:1-4 untagged
configure vlan MediaGrid01 add ports 2:25-26 untagged
configure vlan MediaGrid02 add ports 2:27-28 untagged
configure vlan Default ipaddress 10.0.102.2 255.255.255.0
configure vlan Mgmt ipaddress 10.20.205.1 255.255.255.0
configure vlan imtlab ipaddress 10.0.1.254 255.255.255.0
configure vlan imtlab_cxfs ipaddress 10.10.10.1 255.255.255.0
configure vlan MediaGrid ipaddress 10.10.20.1 255.255.255.0
configure vlan MediaGrid01 ipaddress 192.168.1.1 255.255.255.0
configure vlan MediaGrid02 ipaddress 192.168.2.1 255.255.255.0
configure vlan test ipaddress 10.0.101.1 255.255.255.0
enable ipforwarding vlan test
#
# Module fdb configuration.
#
configure iparp vr VR-Default max_entries 4096
#
# Module rtmgr configuration.
#
#
# Module mcmgr configuration.
#
#
# Module aaa configuration.
#
create netlogin local-user "000000000010" encrypted "POdPP9$Q9bL1QxVAvr/E6VHDoBRE0" vlan-vsa untagged bill
create netlogin local-user "000000000012" encrypted "/rd0P9$Kt9YgDLbciyr3jPPLybEr1" vlan-vsa untagged Default
create netlogin local-user "00:1f:5b:35:1c:30" encrypted "M77SL9$NTfoMHB8cy0eMv4.FxiPJ1" vlan-vsa untagged bill
create netlogin local-user "d4:9a:20:b8:c2:56" encrypted "WvkoM9$yDhJWWx7aSmxxBWLdp.5m1" vlan-vsa untagged bill
create netlogin local-user "imt" encrypted "qLvLH9$JgDULFLPclGrPwCsB47Zr1"
#
# Module acl configuration.
#
configure access-list zone DOS application Dos application-priority 1
configure access-list zone SYSTEM application NetLogin application-priority 3
configure access-list zone SECURITY application GenericXml application-priority 2
#
# Module cfgmgr configuration.
#
#
# Module dosprotect configuration.
#
Been a lurker on here for quite some time and never made the jump into the world, but gotta say feels good to be signed up!
So I've got an issue on hand here...
I have a core network running on a 10.0.101.1/24 subnet for all our LAN clients. I also have a demo lab holding the 10.0.102.1/24 and other subnets. I wanted to tie the two swithes together and have it so i can be on the .101.1/24 subnet and be able to talk to the .102.1/24 subnet or ANY subnet i create on the Extreme switch for that matter!
I have set up 2 VR interfaces on the Brocade, (1 for .101.1 sub and one for .102.1 sub)
Problem is i am still unable to ping from my extreme to the brocade and vice a versa.. here is a quick show Vlan. Mind you if i plug into the port on the brocade and put myself in the subnet i can ping the virtual interface on the brocade..
* Lab_Front_Extreme.38 # show vlan
---------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------
Default 102 10.0.102.2 /24 -----------T----------- ANY 24/45 VR-Default
imtlab 2 10.0.1.254 /24 ----------------------- ANY 0 /0 VR-Default
imtlab_cxfs 1000 10.10.10.1 /24 ----------------------- ANY 2 /4 VR-Default
Lab 4086 ------------------------------------------- ANY 0 /0 VR-Default
LabMGMT 4085 ------------------------------------------- ANY 0 /0 VR-Default
MediaGrid 4089 10.10.20.1 /24 ----------------------- ANY 12/19 VR-Default
MediaGrid01 4088 192.168.1.1 /24 ----------------------- ANY 2 /2 VR-Default
MediaGrid02 4087 192.168.2.1 /24 ----------------------- ANY 2 /2 VR-Default
Mgmt 4095 10.20.205.1 /24 ----------------------- ANY 1 /1 VR-Mgmt
netlogvlan 4094 --------------------D---------------------- ANY 0 /0 VR-Default
nlvlan 4091 ----------------------LN------------------- ANY 0 /0 VR-Default
test 101 10.0.101.1 /24 -f--------------------- ANY 0 /0 VR-Default
trunk_to_brocade 4082 ------------------------------------------- ANY 0 /0 VR-Default
---------------------------------------------------------------------------------------
Flags : (C) EAPS Control VLAN, (d) NetLogin Dynamically created VLAN,
(D) VLAN Admin Disabled, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (i) ISIS Enabled, (L) Loopback Enabled,
(l) MPLS Enabled, (m) IPmc Forwarding Enabled,
(M) Translation Member VLAN or Subscriber VLAN,
IP Multinetting Enabled,(N) Network Login VLAN, (o) OSPF Enabled, (O) Flooding Disabled, (p) PIM Enabled,
(P) EAPS protected VLAN, (r) RIP Enabled, (R) Sub-VLAN IP Range Configured,
(s) Sub-VLAN, (S) Super-VLAN, (t) Translation VLAN or Network VLAN,
(T) Member of STP Domain, (V) VPLS Enabled, (v) VRRP Enabled
Total number of VLAN(s) : 13
So i was poking around here and did notice that maybe i need to set my default gateway to be the 10.0.101.1 network, but that would only be good for internet access, NOT the .102.1/24 subnet.
My next theory is the problem with the VR-Default Router. Will/is this creating a conflict with my brocade cause we are doing double routing??? My gut says yes... but never 100% sure!
I'll leave it here, cause i have been here for about 12 hours and quite frankly, I'm a little shot on the situation.
Ill report in tomorrow when i begin with another go..
Thanks for your time,
P
**this might help you all**
* Lab_Front_Extreme.34 # show configuration
#
# Module devmgr configuration.
#
configure snmp sysName "Lab_Front_Extreme"
configure timezone -480 autodst
configure slot 1 module G48T
configure sys-recovery-level slot 1 reset
configure slot 2 module G48T
configure sys-recovery-level slot 2 reset
configure slot 5 module 10G8Xc
configure sys-recovery-level slot 5 reset
#
# Module vlan configuration.
#
configure vlan default delete ports 1:24, 1:45, 1:48, 2:1-48, 5:1-8
configure vlan Default tag 102
create vlan "imtlab"
configure vlan imtlab tag 2
create vlan "imtlab_cxfs"
configure vlan imtlab_cxfs tag 1000
create vlan "Lab"
create vlan "LabMGMT"
create vlan "MediaGrid"
create vlan "MediaGrid01"
create vlan "MediaGrid02"
create vlan "netlogvlan"
create vlan "nlvlan"
create vlan "test"
configure vlan test tag 101
create vlan "trunk_to_brocade"
configure ports 5:1 auto off speed 10000 duplex full
configure ports 5:2 auto off speed 10000 duplex full
configure ports 5:3 auto off speed 10000 duplex full
configure ports 5:4 auto off speed 10000 duplex full
configure ports 5:5 auto off speed 10000 duplex full
configure ports 5:6 auto off speed 10000 duplex full
configure ports 5:7 auto off speed 10000 duplex full
configure ports 5:8 auto off speed 10000 duplex full
enable sharing 2:23 grouping 2:23-24, 2:48 algorithm address-based L2 lacp
enable sharing 5:6 grouping 5:6-7 algorithm address-based L2 lacp
enable sharing 1:24 grouping 1:24 algorithm address-based L2 lacp
configure vlan Default add ports 1:1-23, 1:25-44, 1:46-47 untagged
configure vlan imtlab_cxfs add ports 1:19-22 tagged
configure vlan MediaGrid add ports 2:1-15, 5:1-4 untagged
configure vlan MediaGrid01 add ports 2:25-26 untagged
configure vlan MediaGrid02 add ports 2:27-28 untagged
configure vlan Default ipaddress 10.0.102.2 255.255.255.0
configure vlan Mgmt ipaddress 10.20.205.1 255.255.255.0
configure vlan imtlab ipaddress 10.0.1.254 255.255.255.0
configure vlan imtlab_cxfs ipaddress 10.10.10.1 255.255.255.0
configure vlan MediaGrid ipaddress 10.10.20.1 255.255.255.0
configure vlan MediaGrid01 ipaddress 192.168.1.1 255.255.255.0
configure vlan MediaGrid02 ipaddress 192.168.2.1 255.255.255.0
configure vlan test ipaddress 10.0.101.1 255.255.255.0
enable ipforwarding vlan test
#
# Module fdb configuration.
#
configure iparp vr VR-Default max_entries 4096
#
# Module rtmgr configuration.
#
#
# Module mcmgr configuration.
#
#
# Module aaa configuration.
#
create netlogin local-user "000000000010" encrypted "POdPP9$Q9bL1QxVAvr/E6VHDoBRE0" vlan-vsa untagged bill
create netlogin local-user "000000000012" encrypted "/rd0P9$Kt9YgDLbciyr3jPPLybEr1" vlan-vsa untagged Default
create netlogin local-user "00:1f:5b:35:1c:30" encrypted "M77SL9$NTfoMHB8cy0eMv4.FxiPJ1" vlan-vsa untagged bill
create netlogin local-user "d4:9a:20:b8:c2:56" encrypted "WvkoM9$yDhJWWx7aSmxxBWLdp.5m1" vlan-vsa untagged bill
create netlogin local-user "imt" encrypted "qLvLH9$JgDULFLPclGrPwCsB47Zr1"
#
# Module acl configuration.
#
configure access-list zone DOS application Dos application-priority 1
configure access-list zone SYSTEM application NetLogin application-priority 3
configure access-list zone SECURITY application GenericXml application-priority 2
#
# Module cfgmgr configuration.
#
#
# Module dosprotect configuration.
#