Brocade Silkworm 4100 Boot environment help

[drc9979]

I am trying to repair a Brocade Silkworm 4100. When connected to the serial port on boot up all i get is the following menu.
The system is coming up, please wait...


1) Start system.
2) Recover password.
3) Enter command shell.

Option?

The Start System Option just reboots to this menu again. When i enter the command shell and view the boot environment it looks like ti should try to boot to the fabric operating system on hda1. heres the boot env.
> printenv
AutoLoad=Yes
ENET_MAC=00051E34F1B9
LoadIdentifiers=Manually selected OS
OSBooted=MEM()0xf0000000
OSLoadOptions=quiet;quiet
OSLoader=MEM()0xf0000000;MEM()0xf0800000
OSRootPartiton=hda1;hda2
SkipWatchdog=Yes

Any help?

 

[comtec17]

Looks like you have no operating firmware.