Hi I am hopping to get some help.
I am in chage of a high school low power radio station. We use low power transmitters and radiating cable One "system" is located in the schools main building. Thats where the radio station is. The problem we have is there are 10 outer builings we need to get the signal to. two of these buildings should have there own transmiters and radiating cable. ( the radiating cable has been stung already) But I need to find a way to get basicly the audio from the radio station to these two buildings. Each builing has Fiber optic cable and an alcatell network switch. Each building also has a 50 pair telephone cable ( old not twisted or shieled) Now-- I would used a few pairs of that but electrical runs next to all the phone/data conduit and causes horrible interfearance. any recomendations maybey there is a way to make use of the network.
THANKS
JAke
I am in chage of a high school low power radio station. We use low power transmitters and radiating cable One "system" is located in the schools main building. Thats where the radio station is. The problem we have is there are 10 outer builings we need to get the signal to. two of these buildings should have there own transmiters and radiating cable. ( the radiating cable has been stung already) But I need to find a way to get basicly the audio from the radio station to these two buildings. Each builing has Fiber optic cable and an alcatell network switch. Each building also has a 50 pair telephone cable ( old not twisted or shieled) Now-- I would used a few pairs of that but electrical runs next to all the phone/data conduit and causes horrible interfearance. any recomendations maybey there is a way to make use of the network.
THANKS
JAke