Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bridging with with 1601 R
- Thread starter mufka
- Start date
My first question is why bridging? Are you are trying to pass something like SNA? If it just broadcast traffic you need ( DHCP, TFTP etc) you can use IP Helper or UDP forwarding.
In global config mode:
!
bridge (BG number) protocol ieee(normally)
!
Change to the interface you want the bridge group on.
!
bridge-group (BG number)
!
For much more details about bridging, use this link:
Mike S
In global config mode:
!
bridge (BG number) protocol ieee(normally)
!
Change to the interface you want the bridge group on.
!
bridge-group (BG number)
!
For much more details about bridging, use this link:
Mike S
- Status
