BRI Question 1

[pops185]

Customer has T1 with a BRI for a backup. I have never setup a BRI before. I went to add bri a09, what do I put in the fields, network? user? Slave? What protocol?
Help

 

[slovic]

Hi pops185,

Try with this:

ISDN-BRI

add tru n
Group Type: isdn-pri
Carr Med: PRI/BRI
ServType: public-ntwrk
Trunk Param
6/260/c

~page 3~
public-ntwrk 4 5099 4 444

~page 4~
01A0801 01A0802
01A0817 01A0818
isdn-bri I isdn-bri II


ch bri xxxxx
Name: ISDN Interface:a-law T3Timer:15
Port Protoc TEI Time Fill Inv Syn Lay Det
user etsi auto ones n n y n
(for one BRI fill in one user)


It works for me....

 

[pops185]

Thanks solvic, I think we're on the right track, But when I do a sta trunk group, I get disconnected NE. I just crosswired the 1 pair circuit to the 1st pair of the 25 pair cable. I put in 2 users in the ch bri page is that right? Thanks in advance.

 

[nohuhu]

pops185,

it's not a surprise if you're trying to back up t1. i don't think u.s. telcos are happy to provide euro-isdn. so at least you should change companding to mu-law instead of a-law and country protocol 1 instead of etsi. and there is a second page of this form where you should fill spid field if it is required by your telco.