Bri configuration for video conference

[forcetranquille]

Hi all,

I'm trying to install a polycom VSX 7000 on a BCM400. do you know how to set up the bri module for this device ?

Thanks for your help


French Technical Engineer

 

[bigg3rdude24]

up for this thread. i also want to know if this is possible and if someone has deployed anything like this

 

[CyberX666]

Under Loops for the BRI change one of the ports from T to S.

Then you need to give the S a Loop DN, go to All DN's and scroll down until you see DN that are assigned to ISDN make a note of this DN and go back to loops, under your S loop assign the ISDN DN to the loop DN.

This should work for you.