BRI 2B+D trunk to PSTN allowed in TSE 4.1 with TLU79/11 1

[njohn343]

Hi all,

I want to add a BRI / BRA 2B+D PSTN route using TLU79/11.

There is no option in Manager Provisioning to add such a route.

The only options I can see for signalling under the Telephony | External Lines tab when adding a Route are :

ISDN 30B+D Private
ISDN 30B+D Public
ISDN 23B+D Private
ISDN 23B+D Public
IP Private H.323
IP Public SIP

Is BRI 2B+D even supported in TSE 4.1?

Using another tack I tried to add the route and trunks via Command Line to the TLU79/11 but get the error 'CONFIG CONFLICT'.

I have spent quite a few hours on this problem but haven't gotten very far. Comments or help appreciated.

John.

 

[rfpup]

sure they are supported,

at least over command line yes, I do not know if supported over graphical interface.

[tt]
MDSH> rocap:rou=106;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
106 7130000000000010 4 3100000007 0 30 128 00151515 211110000030 111111

END

MDSH> rodap:rou=106;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
106 SL60 H'00000212 H'15500000 H'46410000 NO
[/tt]

 

[njohn343]

Those parameter settings WORK!

At the moment, I do not know on which parameter(s) I was making my error but I can finally add trunks to our TLU79/11. Another hurdle overcome.

Appreciate your help rfpup,

John.