BPOS Assignment 1-0-30

[Monrovia]

hi everybody

I am bit confused in this matter

i have one bpos 1-0-30 free. actually i was in a thought that i will use this bpos for ELU29. so i inserted one elu29 and assigned extensions on it. But later on I have decided to go for ELU28. but after removing the elu29, the slot still remain for elu29, even after giving CNHUI command, restarting the lim, on off the lim (reload & restart), the bpos still remain for elu29
[tt]DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 57 32 PASSIVE
001-0-10 102 32 ACTIVE
001-0-20 116 16 ACTIVE
001-0-22 77 16 ACTIVE
001-0-30 87 16 PASSIVE
001-0-32 87 16 PASSIVE[/tt]

I have not configured 1-0-32(elu29) too. but it is ok, i am going for elu29.

so when i insert the elu28, and CNHUI:BPOS=1-0-30; it is giving like system blocked

[tt]DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 57 32 PASSIVE
001-0-10 102 32 ACTIVE
001-0-20 116 16 ACTIVE
001-0-22 77 16 ACTIVE
001-0-30 87 16 SYSTEM BLOCKED
001-0-32 87 16 PASSIVE[/tt]

what could be the reason, that the system is not taking the hardware change?

 

[dstrang1]

Send CNBOE:BPOS=1-0-30; then you should be able to add the new board with CNHUI.

Good luck,

Dave Strang

 

[Monrovia]

oh my god! since morning i am trying relod restart,etc etc

thanks dstrang

tomorrow morning let me do this