BP 250 IP PHONES

[teenu3]

Hi All,

I Replaced ip phone 4200 with a 4422 phones but could not login.
i was told to load the config file for 4422.
how to get that file, if i load it will it effect the other 4200 phones.
and were to load the file. is it to in tools-firmware in BMS?
please advise.

Regards

 

[xs650]

the config file is delivered with the IP phones firmware and loaded
via HTTP server into the phones. You can use the BMS http server for this.

 

[teenu3]

HI xs 650,

I got the file i don't understand were to and how to load in the BMS.

Thanks

 

[xs650]

when you are using 44xx V2 phones create a folder named dbc42x02
in the BMS

http://wwwroot

folder so that you get something like this:
...\BMS\Server\

http://wwwroot\dbc42x02

Put the Software and config file into this Folder, set the software server in the ip phone
to the ip address of the bms Server and restart the phone.
The webserver must use port 80!

 

[teenu3]

Thanks Xs650.