Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BP-250 Ericsson - IPU Networking

Status
Not open for further replies.

CYM3160

Technical User
Feb 28, 2006
6
ES
Hello, I´ve a costumer with two BP-250 conected by IPU QSIG, one is installed in Spain, and the another one in China. Calls between extensions of the two sites are correct.They can see the extensión number and the name of calling extensión. The BP-250 of Spain has a primary connected, and I need that when a Chinese extension, make an outside call, through the primary of Spain, to send your extension number. Now if I see the trace in the primary board, it appears that the call is maked, by the trunk of the IPU of Spain.

It´s possible that China extensions, send the extension number through the board of the primary of Spain?

The BP-250 installed i Spain, is in the R-13 version. The BP-250 installed in China, is in the R-15 versión.

 
try to set cmd 1038 to 1 or 2 on the trunks of the primary in Spain.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top