I work for a printing company and we print on a variety of machines. Regardless of making sure that documents have no gutters, margins, etc. there is always a 1/4 - 1/2 inch margin left when printing and we can't figure out how to fix it. If anyone has any suggestions, it would be great. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Borderless printing
- Thread starter LPedante
- Start date
...most inkjet and desktop printers don't print to the edge of the sheet size you are printing on, some output devices do offer borderless printing. If you have artwork that bleeds off the sheet you will therefore need to print to a larger paper sheet to fit the whole image...
Andrew
Andrew
The reason most printers cannot print right to the edge, is because the rollers need something to grip to pull the paper through. That area cannot also be printed on. The usual way round it is to trim off the excess paper after printing (on a sheet size larger than the layout).
- Status
Similar threads
