thecynicality
Technical User
Hi, Everytime i try to border a selection and fill it, it becomes feathered, is there anyway to prevent it from doing this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bordering Selections 1
- Thread starter thecynicality
- Start date
- Status
-
1
- #2
mscallisto
Technical User
Found this
To prevent the selection from becoming feathered, turn on QuickMask after applying Border, then choose Image>Adjust>Levels and change the Input settings to 125, 1.0 and 133, this will give you an anti-aliased selection. For a true hard-edged selection, choose Image>Adjust>Threshold instead of Levels.
From here
Hope this helps
To prevent the selection from becoming feathered, turn on QuickMask after applying Border, then choose Image>Adjust>Levels and change the Input settings to 125, 1.0 and 133, this will give you an anti-aliased selection. For a true hard-edged selection, choose Image>Adjust>Threshold instead of Levels.
From here
Hope this helps
prophotodx
Technical User
- Jan 20, 2003
- 147
- 0
- 0
Do you have the feather option on in the options bar? Make sure it is set to 0.
DBX
(Try it my way, it might work...)
DBX
(Try it my way, it might work...)
- Status
Similar threads
- Locked
- Question