Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bootup keeps going to Safe Mode/Normal choice

Status
Not open for further replies.

righty01

Technical User
Apr 29, 2003
4
US
I have a computer that was booting up fine. All of a sudden the Video driver, the printer, and mouse drivers dropped out. I reinstalled those but now every time I bootup it keeps going to the 7 choices for normal or safe mode with normal always highlighted. I hit enter and it boots fine from there. Any ideas why this all happened in the first place and how do i get it to just pass the safe mode/normal page?
 
There was nothing to cause 'all of a sudden'? (added/removed hardware/software etc)

Previous problems?

Personally I'd just get rid of 98 (well, I did in 99 - went to NT, then 2k - am SO glad I did).

When this happens with 98 - most popular is to backup & do clean install. It could be a hardware problem - but can't tell from your description.
 
By any chance is your F8 key stuck? (I've seen it happen).
 
Edit MSDOS.SYS. Find "BootMenu=1" and chnge it to zero.
 
Do you have Tweak-UI installed? If so, make sure "Always Show Boot Menu" is not checked under the Boot tab.

Jim

 
Let's try the easy solution before reinstalling o/s or editing files...

Run MSCONFIG.EXE
click the Advanced button
If "Enable Startup Menu" is checked, uncheck it.
Reboot.

If that isn't the case, try ANFPS's solution next.

Post back if any of our suggestions help.

Dana [glasses]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top