Bogen PCM2000 Setup on Cisco Analog Port on VG310

[billyh7]

Just migrated customer from Avaya to Cisco. Paging was working fine in Avaya with a Ground Start Trunk group.
Configured Cisco VGW with GS analog line and I can't get it to work. I changed the Bogen PCM2000 to Loop Start and reconfigured my Cisco analog port to Loop Start and still not working.

I can page no problem with butt set connected to Bogen PCM2000 and if I move it back to the Avaya PBX it works great.

What am I missing?


Thank you

 

[gnrslash4life]

Never used that particular model but you probably need to adjust the dip switches on the unit itself.

Certifications:
A+
Network+
CCENT
CCNA Voice
CCNP Voice

 

[thepfy]

The issue could be on the Avaya it is set as a Trunk but on VG's they are lines, unless you have an add in module. (FX) vs FXS).

Setup 5 in [URL unfurl="true"]https://www.bogen.com/products/pdfs/telephonepagepdfs/PCM200c.pdf[/url] may help