I have a CICS and a 3rd party installed a Bogen Page Equipment. I have the external paging working on a CO port. I access line 7 and dial 00 and the horns work. I can page through phones as well on another page button. I do not know how to get the horns and phones to page at the same time as it used to do prior to installing the Bogen equipment? TY, Joe
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bogen Paging on CO Port
- Thread starter Joepappy
- Start date
phoneguy427
Technical User
It sound like you have talkback or zone paging set up with the bogen, that's the reason for the 00 I believe,(it's been a while). If you don't need those put the amp back on the page port of the ksu. pair 25 on the line amphenol bix Then you can do an all page on one button.
allworxguy
Vendor
You can't page all and a CO line. Does the Bogen have a page in port? If so use that. Then you can do a page sets and external speaker.
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
curlycord
Programmer
Post all the models numbers of the Bogen items.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
- Thread starter
- #5
allworxguy
Vendor
Psge out is on the violet/slate. on the CO lines Amphenol.
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
- Thread starter
- #7
curlycord
Programmer
Once you connect it to Violet/Slate pair try Feature 63000
The idea is to page 630 for all sets/zones and then 00 for the warehouse zone.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
The idea is to page 630 for all sets/zones and then 00 for the warehouse zone.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question