Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BlueCoat ProxySG 510C and ERS 5530

Status
Not open for further replies.

DaddyOfThree

Technical User
Dec 26, 2007
224
US
I have a question for you!

It would seem that I've discovered a curious issue with autonegotiation between 4 Blue Coat ProxySG 510Cs and 2 Nortel ERS 5530 switches.

One of the onboard NICs is connected to a ERS 5530 switch and has negotiated 10Mbps Full Duplex. The second onboard NIC is connected to an ERS 5510 switch and has successfully negotiated 1000Mbps Full Duplex. This is the same for all 4 ProxySG 510Cs using 2 5510s and 2 5530s. It's not a duplex mismatch problem... both devices are just negotiating 10Mbps Full Duplex as opposed to 1000Mbps Full Duplex.

I know we can hard set the speed and duplex but I thought it was very odd and was curious if anyone else has ever seen this problem.

I'm wondering if there is any known issue running both onboard ports at 1000Mbps Full Duplex on the BlueCoat ProxySG 510C.

Thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top