Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Block the hour
- Thread starter TechInter
- Start date
- Thread starter
- #3
Auto-Time & Date
The Automatic Time & Date feature enables the Norstar system to use incoming CLASS trunk call information to automatically update the time and date on the Norstar system. Press change to choose Y or N.
You can program the Automatic Time & Date feature to enable the Norstar system to automatically update the time and date after a power failure.
Whenever the clock is out of sync by more than two minutes as a result of a power failure or a loss of power, the first incoming call updates the clock automatically after two rings.
The Automatic Time & Date feature enables the Norstar system to use incoming CLASS trunk call information to automatically update the time and date on the Norstar system. Press change to choose Y or N.
You can program the Automatic Time & Date feature to enable the Norstar system to automatically update the time and date after a power failure.
Whenever the clock is out of sync by more than two minutes as a result of a power failure or a loss of power, the first incoming call updates the clock automatically after two rings.
- Thread starter
- #6
- Thread starter
- #8
- Status
Similar threads
- Locked
- Question
- Locked
- Question
