Block Local NXX's on LD route

[jamie2]

I use to get my long distance via a carrier that blocked and prevented my users from dialing a local nxx and would play an intercept message to hang up and dial long distance.

Now I have a new LD Carrier that will allow local dialing over our LD Span and will bill us if users dial this way. I tried to block all the local NXX's using the SDDR DENY, but it is limited to 64 NXX's and I need to block 100 NXX's.

Any suggestions to block 100 NXX's within a certain NPA?

 

[bhassell2000]

Ho ware they programmed to go our in your NARS/BARS? You go program them to go out a different route by changing their RLI

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[jamie2]

9 - Local
8 - LD

However, we have users that will dial local calls as LD calls.

 

[GHTROUT]

We're asking for more than what you call 8 and 9. We want to know specifically what the PBX calls 8 and 9.

You must do this

>LD 20
REQ PRT
TYPE DNB
CUST 0 (and 1, and 2)
DN 8 (then do the same for 9)




--
Nortel Resources at GHTROUT.com World Famous!
--