Block caller ID on Centrex lines

[Rapetou]

Hello all,

I know we can use "*67" with Bell Canada to hide your CLI on outgoing calls.

What is the * code we can use on Centrex lines?

The "*67" is note working on it

Thanks

Rap.

 

[cook1082]

Check with the Phone Co. to see what the code is.

 

[hawks]

Have you tried:
F819 blocks the outgoing name and number on a per call basis.

 

[Rapetou]

F819 is working if your using OLI in your system.

I can not use OLI with analog trunks so, it doesn't work.

 

[cook1082]

I do not believe the F 819 works on analog lines.You can not send any OLI or anything like that.

 

[hawks]

It should work but you still might have to get with Telco to see what you need to set it for. Look at ONN blocking in the installer guide.

 

[bostech]

I tried *67 on centrex lines here in the Boston area. Worked fine. So, there is not a special *-code just for centrex. Check w/ your telco.

 

[XZombi]

*967

 

[Rapetou]

Thanks XZombi,

I will try it next monday...

I will post the result after.

Thanks again.

Rapetou

 

[Diablo1]

I think it would be 9*67.