BLOB files FlmAdopt C067

[BuckPYNY]

when running gwcheck standalone or server I get the following, tens of thousands of the following, the file name changes but the rest stays the same:

Error 52- Blob file with missing trailer: 3F90C8DF.000
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from FlmAdopt = 0xC067
Return from ExportDocumentBlob = 0xC067

I've looked at Novell for TIDs and found some that hint at a cause but no luck at all on finding anything about FlmAdopt.
Thanks in advance
Buck

 

[KenB]

Buck,
Check out TID10074228 and see if it fits the problem you are having. If so it should provide the answer.

HTH
Ken

 

[BuckPYNY]

I've read it a couple times, and tried what is suggested but the problem continues. I'm surprised that there is no mention of FlmAdopt anywhere that I've searched. I have yet to see a C067 on the POA even in diagnostic mode let alone verbose. I even watched for the C067 while running a contents check to no avail. Thanks for responding, ask away if you have questions.
Buck