Have the following scenerio:
Old WAN link OC3 ATM into BLN.
New WAN link 622MBS handed by carrier CPE CISCO ONS as 1GigE Native LAN Link. Need to maximize bandwidth utilization on new link with the BLN with minimum cost. Also needing other VLans across WAN. A later reconfig with PASSPORT 8600's is more than 9 months away. Current idea front end 1GigE with BS450-24T/1000B-SX MDA. MLT BLN's 100B-TX ports (across two ILI's) into the BS450 as VLan 1. In theory 400MBS leaving 200MBS to additional VLan's off the BS450. When reconfiged the BS450 moves to closet duty.
Have limited to no experimentation time with BLN. Has anyone MLT from a BLN to a BS or PASSPORT? If so, what version of BAYrs 13+, 14...?
Old WAN link OC3 ATM into BLN.
New WAN link 622MBS handed by carrier CPE CISCO ONS as 1GigE Native LAN Link. Need to maximize bandwidth utilization on new link with the BLN with minimum cost. Also needing other VLans across WAN. A later reconfig with PASSPORT 8600's is more than 9 months away. Current idea front end 1GigE with BS450-24T/1000B-SX MDA. MLT BLN's 100B-TX ports (across two ILI's) into the BS450 as VLan 1. In theory 400MBS leaving 200MBS to additional VLan's off the BS450. When reconfiged the BS450 moves to closet duty.
Have limited to no experimentation time with BLN. Has anyone MLT from a BLN to a BS or PASSPORT? If so, what version of BAYrs 13+, 14...?