Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blade HS22 + Cisco 3010X with Cisco CVR-X2-SFP: Uplink to Cisco 2960?

Status
Not open for further replies.

xunil321

Technical User
May 6, 2008
22
DE
Dear all,
we are trying to establish an uplink to a Cisco 2960 (48 ports of Gb Ethernet
and two 10 Gb Ethernet SFP+ ports). At the Blade site there is one IBM 10 GBE
850nm SFP+ Transceiver (CRU 44W4408) in the first slot of the CVR-X2-SFP and
at the Cisco 2960 site we used the CISCO SFP+ 10 Gb transceiver. But there is
no link (electrical contact). What can we do next?

Many thanks for any hints!
Rainer
 
Sometimes on say the 2960 those sfp ports are multiuse and you have to specify whether the port is rj45 or fiber on the port interface.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top