Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blacklist

Status
Not open for further replies.

lanpham_imported

Technical User
Nov 26, 2011
71
VN
Dear all!
I have received many calls recently. Those calls make me uncomfortable! I am fed up with them.
I want to block those calls.
I am using analog, digital and isdn extensions.
Can everyone help me? How to resolve this problem!
Thank a lot!
 
Maybe you can tell the revision and SP of you system?
 
You can’t bar incoming caller i.d. on MD110, you need an application such as solidus

Best parnum
 
To pick up the incoming CLI and route the caller in the front end script. Do you have any other method via the MD110? I’ve routed many incoming CLI of callers using solidus, one company looking up a database of CLI’s and routing to different destinations, so not sure why you think it’s ‘not true’?

Best parnum
 
Long time ago in Centrex version there was cnvtyp 5 (inbound conversion), and it worked fine. Also the same was used on the Russian market (patches) in BC10 (if I remember). so this, I think, is possible in TSW or whatever. TSE - no idea
 
Thanks all!
Hi, Parnum.
It is the first time I have heard Solidus application.
I searched Solidus application in google but i still don't understand it clearly.
Can you tell it detail, what is solidus? and step by step to install it.
By the way, is it free? How does this application efect dangerously to my MD?
Best Lanpham
 
Parnum,
just FYI: I found this from old libraries, so I think it is working without Solidus or whatever external equipment?
/* Short.Descr : Black list for PUB/PRI incoming */
/*----------------------------------------------------------------------*/
/* Fault.Descr.And.Explanation : */
/* Initialize CNVTYP=5, add the blacklisted number (ENTRY),TRC all digits*/
/* and PRE=A. if "A" is in the cnvnumres signal, we go to ENTNOPSTA and */
/* release the call */
 
oh, respected fcpli,
my TSWSP04/R5A says:
NUTRI:ROU=1,ENTRY=.................,CNVTYP=5,PRE=A,TRC=20;
NOT ACCEPTED
CNVTYP 5
NOT ALLOWED
probably need a patch, not find it.
but what a good idea with cnvtyp 5!
 
BlAle, I don't think this patch is in IE or whatever. So if you need it, contact me thru the admin of the forum...
 
Hi,Fcpli!
I used the command:
NUTRI:ENTRY=0912455765,CNVTYP=5,PRE=A,TRC=10;
>EXECUTED
But don't block incoming call (blacklisted number=0912455765)to my extension
When i enter the command:
NUTRI:ENTRY=0912455765,CNVTYP=5,PRE=A,TRC=10,ROU=13;
NOT ACCEPTED
TOO MANY PARAMETERS ENTERED
And I tried to used many other commands with CONT,NUMTYP parameter. But they were not ok.
Have you got any idea to resolve this problem, please.
Best!!!!
 
lanpham, you need to read what is written in the previous answer. It is a patch. You can use all kind of nutri commands, but it is not going to work without it. Then, if I remember, the question long time ago was: What is your MD version/SP?
 
How many patches did you install to make this accept cnvtyp=5?
 
himdp, This really originates from BC10, but the rest is easy, as you know
 
Hi fcpli, yes you mentioned the patches were in the centrex solution. I had a fleeting involvement in that particular nightmare whenI worked in Saudi Arabia. We lost that sale to Meridian so I didn't get to use the feature on a live customer, testing in the lab was as far as I got.

My question was aimed at ensuring that all the patches were implemented. For example if the NUH patch was installed on its own, the command would be accepted but the function would not work. Just a thought as to why lanpham could configure the NUTRI but the function not working could be that the CMP or NUD patch did not run in.
 
himdp,
I know where you worked that time (I was somewhere else) - history. The Centrex was (memory again) introduced in Sweden only, as BSS etc. (I used to play with them (I am not Swedish). About the patches: All of these were implemented as Cxxx, or for a market as Mexico/Saudi or whatever. These patches (I made a mistake - I found them for BC11, not BC10). They begin with C79xxxx, if you have access to the OLD data. But the time is passing...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top