BIX setup hints ?

[MontrealSoft]

Do you guys know of a web page that would list recommendations when building BIX setups ? (CO lines at the top, wall ports at the bottom, etc)

There seems to be a "standard" way to do things, but I haven't spent time yet trying to compare. I build my own setups but would like to adhere to any standard (if they exist) about location of stuff inside the bix panel.

Luc

 

[Arr]

If the label fields are labeled in plain english. That is usually way better than worrying about the label strip color codes. As an example: where the horizontal station runs are labeled in dark blue it is almost impossible to read what is going on even when the field is labeled. So I just use white and write.

PhM

 

[mcisar]

If you really want the "specs" check with the vendor that you buy your BIX mounts from. I usually get a little 8 page booklet from Nortel stuffed in with every 2-pack box of 250 or 300 pair mounts that I buy.

 

[MontrealSoft]

Interesting...... I never got those since the only 250p mounts I installed up to now were used equipment...

Thank's !!