big problem in nortel vrrp!!!

[zhuwei]

i have 2 pp8610,config vrrp,example,vlan100,ip of one pp8610 is 172.16.8.2,another is 172.16.8.3,vrrp ip(virtul ip)is 172.16.8.1,when i change the address of pc1 in vlan 100 to 172.16.8.1(no disaplay duplicate address),so all pc in vlan 100 can't ping another vlan gateway(but can ping pc in same vlan),example the ip of vlan 200(172.16.252.1),arp table of their changed,the mac of 172.16.8.1 change to mac of pc1,when i refresh arp-table of other pc or reboot pp8610,other pc resume communication,how to resolve this problem?
most urgent~~~~~~Thanks very much!!!

 

[xyCruiseryx]

arp table of their changed,the mac of 172.16.8.1 change to mac of pc1,

The Ip Adress 172.16.8.1 is in Arp Table with Mac-Adress von NIc PC1 ????

I dont understand which IP have the Pc1 in Vlan 100 ??? 172.16.8.1 ??? or is this Ip the VRRP Ip ???

exist a connection between the two passports ???

 

[zhuwei]

sorry,it's the arp table of pc2 changed,the mac address of 172.16.8.1 changed into the mac address of pc1,no longer the mac address of virtul gateway.

 

[xyCruiseryx]

The 172.16.8.1 is the VRRP-IP is that correct ????

Which IP is configuring on the PCs..??

Is the Gateway from the PCs the vrrp IP address from passports ???

have a you Master And Backupmaster staus by the pasports ???