Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Biamp Tesira SVC-2

Status
Not open for further replies.

poopus

Technical User
Jan 18, 2007
50
US
Anyone heard or installed a CS1000 SIP line / phone to a Biamp Tesire SVC-2 system? If so what is required?

Thanks,
CWK (poopus)
 
From my experience it's pretty straight forward. We have a vendor that did the remote site install for one for us. Set up a user on System Manager/Session Manager with the requisite line on the CS1K . Use that user and password info at the Tesira and point it at the Session Manager for it's registration. Ours was a pretty straight forward installation for a conference room video system where the Tesira needed simple SIP audio path for voice only calls, and the site network was already set up for using SIP.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top