Best way to program fax did's?

[bluemr2]

What is the best way to program a fax did coming in on a PRI? I program the target lines to the analog port, but no matter what I do, I can't get the bcm to always generate a busy signal when the fax is in use. I have tried if busy, busy signal on the target line, DND on busy on the ext. I have even set up a hunt group with just the 1 fax member, and programmed if busy, busy signal. (This seems to be the best) But sometimes the call will still ring if the fax is in use. Thanks

 

[curlycord]

How many intercom are assigned to the ATA?


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[bluemr2]

I have tried to reduce them to 1, but I still get a ring.

 

[Aerodesliza]

try to use a asm module instead of a ata, im using did with the asm and work flawless, maybe the problem is the ata

 

[DBrewsky]

Either way set it up like this:

1) Program Target Line to "Ring Only" on Analog station
2) Program Target Line to "IF BUSY = BUSY TONE" (you don't need an extension number in Prime Set field, but I usually put the analog station in there just so someone knows where to look if they're looking in programming for a spare target line)
3) Program Analog Station to DND on BUSY

Voila.. Done..



--DB