Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
best way to power cycle?
- Thread starter desertinn
- Start date
Look in Maintenance and you'll see an option to perform a restart. This can also be done from the Element Manager.
Brian Cox
Oregon Phone
Brian Cox
Oregon Phone
oldestgeek
Technical User
Log in, go to administration, utilities, and warm reset or restart. DO NOT do cold reset - that will erase your data base. Also you can choose shut down if you have physical access to the BCM. Don't choose that option if you are remote as you have to physically toggle the power to get it to come back up.
- Thread starter
- #4
The UPS batteries I was told are old and no longer charging. They have to be replaced. In that event how do I power down the BCM and make sure that it comes back up after we change the batteries on the UPS. This BCM is almost 10 years old and I just came on the scene when they IT people did not know what to do with it. Their soloution was "Oh you have to replace it with a CISCO"!!!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question