Anybody have some insight on configuring dscp on a BES 50 switch. I assume that dscp 46 is the default for Nortel IP phones. But I am a bit mystified on the terminology and how exactly to configure the switch to prioritize the traffic. On a 3 com swicth it is as simple as moving dscp 46 to que 4. But not as intuitive on the BES 50.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BES 50
- Thread starter mando1
- Start date
SupportDude
Technical User
From the documentation ....
Enabling IP DSCP priority
You can select Differentiated Services Code Point (DSCP) service as the method for prioritizing Layer 3/4 traffic. The subsequent mapping is to a Class of Service value on the switch.
Procedure steps
Step Action
1 From the main menu, choose Applications > Priority > IP DSCP Status.
2 Select the Enabled check box.
3 Click Submit.
Once enabled, DSCP 46 is predefined for a COS of 7.
If you want to get deeper than that, you need the documnetation.
-SD-
Enabling IP DSCP priority
You can select Differentiated Services Code Point (DSCP) service as the method for prioritizing Layer 3/4 traffic. The subsequent mapping is to a Class of Service value on the switch.
Procedure steps
Step Action
1 From the main menu, choose Applications > Priority > IP DSCP Status.
2 Select the Enabled check box.
3 Click Submit.
Once enabled, DSCP 46 is predefined for a COS of 7.
If you want to get deeper than that, you need the documnetation.
-SD-
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
