Belkin Print Server F1UP0001 work on HP-895Cse?

[duane123]

Has anyone actually been able to get a HP-895Cse to work properly using a Belkin Wireless Print Server model #F1UP0001? I have tried three other network print servers unsucessfully with this printer, so before I spend $100+ to try this Belkin model, I would like some feedback from an actual user of such a set-up. THANKS

 

[wahnula]

duane123:

There is a dedicated forum for HP printers:

forum697

...but I think your best bet is to email Belkin pre-sales support with your question. Then, if it doesn't work, you will have documented information to hold their feet to the fire. I had an old HP Photosmart that would not work with ANY print server/hub, I wished I had researched it first.

If you email pre-sales then you stand the best chance for a reply. If they don't reply...blow them off.

Tony

"...an eye for an eye leaves everybody blind" - M.L. King

 

[wahnula]

duane123:

There is a dedicated forum for HP printers:

forum697

...but I think your best bet is to email Belkin pre-sales support with your question. Then, if it doesn't work, you will have documented information to hold their feet to the fire. I had an old HP Photosmart that would not work with ANY print server/hub, I wished I had researched it first. As a rule of thumb, the older the printer, the lesser chance it will work with a print server. I think the 895Cse is one of the best printers HP made...built like a tank and still functioning after several years.

If you email pre-sales then you stand the best chance for a reply. If they don't reply...blow them off. Use a spare PC as a print server.

Tony

"...an eye for an eye leaves everybody blind" - M.L. King