BEFW11S4 antenna selection.

[aktar]

Hello,

I have three BEFW11S4 from linksys.. All firmware updated to 1.44.2z..

The problem is ,, all in 4 antenna selection section in advance /wireless page in web interface,, whichever antanna selected only left antenna (viewing from from side of router) works.. Right antenna never works,,

I dovngrade the firmware to 1.44 but it dos not helped..

If so,, why LInksys Put a second antenna,,
I want to get a WSB24 and what will be use the second antenna input of the booster..

I asked this to linksys support,, but i did not get a proper answer..
Thank You
Suha Aktar