I have two Linksys BEFVP41's I created the tunnel (1) I can net use from the main office (192.168.1.0) to the remote office (192.168.2.0) I created tunnel (2) contacting SSH client (192.168.3.0) to the main office, I can net use to the main office. I can not net use to the remote office, does anyone now how I can?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BEFVP41 <>BEFVP41<>SSH
- Thread starter richielmt
- Start date
You need either a separate router in main office to perform the routing to remote office - spoke.
Easier way is to create separate tunnel from Sentinel to remote office though, VP41 supports 70 tunnels.
Easiest way is always to apply hub and spoke model when designing network topology.
Easier way is to create separate tunnel from Sentinel to remote office though, VP41 supports 70 tunnels.
Easiest way is always to apply hub and spoke model when designing network topology.
- Status
Similar threads
- Locked
- Question
- Locked
- Question