Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BEFSX41 to BEFSX41 VPN link configuration HELP needed
- Thread starter fanfish
- Start date
No, that is only for making VPN connections from within your network.
To connect your 2 VPN endpoints, you need to make sure all the settings match. And point them to the other's respective IP address...
Where exactly are you running into trouble?
Thanks,
Matt Wray
MCSE, MCSA, MCP, CCNA
To connect your 2 VPN endpoints, you need to make sure all the settings match. And point them to the other's respective IP address...
Where exactly are you running into trouble?
Thanks,
Matt Wray
MCSE, MCSA, MCP, CCNA
- Thread starter
- #3
mattwray
I managed to get my VPN connection going, but I'm just trying to understand the filter settings now.
Current settings
Block LAN request • Disable
Multicast Pass Through • Disable
IPSec Pass Through • Disable
PPTP Pass Through • Disable
Remote Management • Disable
Remote Upgrade • Disable
MTU • Auto
If I set block WAN requests, will the VPN link still work?
what about if I enable all the passthroughs. Will the VPN link still work?
I managed to get my VPN connection going, but I'm just trying to understand the filter settings now.
Current settings
Block LAN request • Disable
Multicast Pass Through • Disable
IPSec Pass Through • Disable
PPTP Pass Through • Disable
Remote Management • Disable
Remote Upgrade • Disable
MTU • Auto
If I set block WAN requests, will the VPN link still work?
what about if I enable all the passthroughs. Will the VPN link still work?
- Status
Similar threads
- Locked
- Question